Thin Sheet Mechanical Feeder

• Thin sheet mechanical feeder is one type smart and easy to operate feeder machine in the market.
• It can feeds sheet metal coil material width up to 400mm, thickness up to 2.2mm, with max. feeding speed 20m/min.
• Operating with Computerize Numerical Control by PLC program from MITSUBISHI made in Japan, it can ensure +/-0.01mm high feeding precision.
• Usually it matches with adjustment signal from the cutting machine, Power Press Machine and CNC lathe machine.
• Directly input the 20 difference feeding length on the control display screen and then it can reach needed feeding length, the Max. Feeding length is 9999.99mm.
• Usually NC Servo Feeder matches with adjustment signal from the cutting machine or Power Press Machine. With two different release type, pneumatic release and mechanical release.
• We manufacture high-precision drivers by utilizing the capabilities of high-resolution servo motors. We design our machines according to the quality, width, and thickness of the materials you will be processing.
   

1.The feeder, also known as the cam feeder, is mainly used for high speed and high precision synchronous feeding, consisting of a housing, a first shaft (equipped with a splitter and an eccentric), a second shaft (equipped with a turret), a third shaft, and a Four shafts (equipped with a first roller and gear), a fifth shaft (equipped with a second roller and a second gear), a gear set (composed of third to sixth gears), a swinging seat, a swinging arm and a pressing device
2.The feeder is connected to the punch output shaft through the first shaft to operate, the splitter shifts the turret to rotate the second shaft, and the first roller is rotated by the gear set
3.The eccentric wheel drives the swinging seat to move up and down. When the swinging seat moves downward, the second roller and the first roller can rotate together through the second gear and the first tooth to perform feeding.
4.When the swinging seat moves upward, the second gear can be separated from the first gear, so that the second roller can be separated from the first roller to stop feeding, thereby ensuring high-speed and high precision feeding of the feeder

1.Feeding roller: GCr15, high frequency, high precision grinding, hard chrome to above HRC60

2.Feeding gear: 20CrMnTi, carburizing and quenching, precision hobbing, grinding, HRC55～60 degrees, precision national standard 6

3.Feeding bearing: NSK

4.Electric control functions: Auto feeding, manual feeding/return, reset, feeding speed adjustment, EMG Stop

(If the customer has higher strength materials, we can further communicate and modify the plan.)

Due to continuous research and improvement of the company's products, the above specifications, pictures, parameters are subject to change without prior notice, support customization.

Hot Tags: thin sheet mechanical feeder, China thin sheet mechanical feeder manufacturers, suppliers, factory, High Speed Gear Feeder, High Speed Roll Feeder, Thin Sheet Mechanical Feeder, mechanical roll feeder, Gipper Feeder, mechanical feeder